battery powered wireless dmx led lights


Battery Powered Wireless Dmx Led Lights Receiver 2.4G Ism DJ Wireless System Dmx512 Controller For PAR Party Stage Light Effects

Battery Powered Wireless Dmx Led Lights Receiver 2.4G Ism DJ Wireless System Dmx512 Controller For PAR Party Stage Light Effects

Dmx 512 Controller Rechargeable Battery Wireless Receiver 2.4G Ism Dmx512 Wireless Transmitter Receiver For Stage Light Effect

This rechargeable receiver is used to stage light. It transmits standard DMX512 protocol data (generated by console). With it, you can control stage light in wireless way.

Features:

It can work about 9 hours after battery being fully charged.
Support color jumping in 126 channels.
High anti-jamming ability ensure stable performance.
User can use 7 groups individual wireless net without any interfering in the same place. (Tricolor LED displaying indicators)

Specifications:

Input voltage: 5V DC 500mA
Working frequency section: 2.4G ISM
Communication distance: 700M (visible distance)
Working frequency section: 2.4G ISM, 126 channels
Receiver sensitivity: -94dBm
ID code group quantity: 7
Battery: 16340 battery 3.7V 650mA
Power adapter: US standard, UK standard, EU standard, AU standard (optional)
Cable length: 177cm / 5.8ft
Item size: 2.6 * 11.3cm / 1 * 4.4 in (D * H)
Item weight: 81g / 2.8oz
Package size: 14.8 * 10.8 * 4cm / 5.8 * 4.3 * 1.6in (L * W * H)
Package weight: 192g / 6.8oz

Operating manual:

ID code and LED color corresponding relationship:
1: RED
2: GREEN
3: RED+GREEN
4: BLUE
5: RED+BLUE
6: GREEN+BLUE
7: RED+GREEN+BLUE
1) Press momentary switch above the side led indicator to indicate ID setting.
2) Press again to set IC, to the color ID desired, adding 1 each time you press the switch will advance the color ID code.
3) Working condition:
LED constant lit up: No DMX or wireless signal.
Red LED flash: Transmitting.
Green LED flash: Receiving
4) RF frequency 2.400 - 2.525G, total 126 channels, it’s searching automatically.
5) ID Code “1-7” groups ID code, press ‘KEY’ for setting, it only can work under same ID code of transmitter and receiver. (Same LED Color)

Establishing communication:

1. Power on DMX512 wireless received board first and then following to power up the transmitted board.
2. Press “Key” button to set same ID value of transmitted board and received board. Please use different ID value if you need use more than 1 group wireless universals at same time in same place.
3. The red LED flashes when transmitter transmits DMX data by no interfered frequency section, then receiver changes communicated frequency section. Green LED flashes until received same ID value, the more DMX data, the faster the LED flashes.
4. Communication was established correctly.

Packaged including: (Depends on your order)

1T = 1pc transmitter +1pc power adapter

1R= 1pc receiver + 1pc power adapter

1T and 1R= 1pc transmitter + 1pc receiver +2pcs power adapters

1T and 2R= 1pc transmitter + 2pcs receivers+3pcs power adapters

1T and 3R= 1pc transmitter + 3pcs receivers+4pcs power adapters

1T and 4R= 1pc transmitter + 4pcs receivers+5pcs power adapters

1T and 5R= 1pc transmitter + 5pcs receivers+6pcs power adapters

1T and 6R= 1pc transmitter + 6pcs receivers+7pcs power adapters

1T and 7R= 1pc transmitter + 7pcs receivers+8pcs power adapters

2T and 4R= 2pc transmitter + 4pcs receivers+6pcs power adapters

2T and 5R= 2pc transmitter + 5pcs receivers+7pcs power adapters

2T and 6R= 2pc transmitter + 6pcs receivers+8pcs power adapters

Note:

Indoor use only.
3 years warranty, repairment, free replacement except damaged artificially.
The manufacturer willn’t offer free service in warranty period if any repaired or uncapped had happened
It’s better to return to manufacturer if repairment is must, don’t do any repairment unless qualified electrician.
The working condition should be under temperature -20°C~+45°C, 10%~90%RH, no congelation, so as to ensure it’s lifetime.
It cann’t be covered by any superstratum, it should be swept periodly to prevent dust.

FAQ:

Q : Can I use this with microphones ? Can I use to make the microphones wireless ?

A : No....this is for wireless DMX control of lights not audio .

Q : Have receiver build-in battery?

A : YES

Q : Which plug i can choose ?

A : EU plug, US plug, AU plug, UK plug

Q: How many metters for the communication distance?

A: The standard reliable and safe communication distance between our transmitter and receiver is 700 meters.


DMX512 Wireless Controller Receiver Transmitter 2.4G ISM Dif LCD DMX Controller For Stage Par DJ Disco Bar Lights Moving Heads

DMX512 Wireless Controller Receiver Transmitter 2.4G ISM Dif LCD DMX Controller For Stage Par DJ Disco Bar Lights Moving Heads

2.4G ISM Wireless DMX 512 LCD Controller And XLR Receiver Transmitter For Disco DJ Party Bar Stage PAR Moving Head Laser Light

DMX512 DMX Dfi DJ 2.4G Wireless Transmitter & Tricolor LED Indicators Receiverr For DJ LED Lighting Control 2.4G wireless DMX512 receiver Automatic 126-channel jumping, high anti-jamming ability. 7 groups ID code settable, User can use 7 groups individual wireless net without any interfere. Each other in the same place. (Tricolor LED displaying Indicators)DMX512 DMX Dfi DJ 2.4G Wireless Transmitter & Tricolor LED Indicators Receiverr For DJ LED Lighting Control

2.4G wireless DMX512 receiver

Automatic 126-channel jumping, high anti-jamming ability.
7 groups ID code settable, User can use 7 groups individual wireless net without any interfere.
Each other in the same place. (Tricolor LED displaying Indicators)
Color: as shown
material: metal
Input voltage: 5VDC 500mA
Communication distance: 500M (visible distance)
Work frequency section: 2.4G ISM, 126 channels frequency section
Receiver sensitivity: -94dBm

Operating manual:

ID code and LED color corresponding relationship:
1: RED
2: GREEN
3: RED+GREEN
4: BLUE
RED+BLUE
GREEN+BLUE
RED+GREEN+BLUE
ID Code"1-7" groups ID code, press"KEY" for setting, it only can work under same ID code of transmitter and receiver. (Same LED Color)
Press momentary switch above the side led indicator to indicate ID setting
Press again to set IC, to the color ID desired, adding 1 each time you press the switch will advance the color ID code.
Working condition: LED constant lit up: No DMX or wireless signal. Green LED flash: receiving
RF frequency 2.400 - 2.525 Ghz, total 126 channels, it's searching automatically.

2.4G Wireless DMX 512 LCD Display Controller

LCD wireless receiver/transmitter will help you away from countless wire, and get rid of wire length limitation. It will be a great help to help you to hold a great party.

Features:
DMX512 wireless receiver/transmitter transmit standard DMX512 protocol data by wireless way, which solve lighting control issues of wireless transmitting completely between console and lighting, lighting and lighting and so on, It get rid of connecting cable limited completely. And also can ensure without any time delay when signal data is transmitting, signal data is real time and reliably.
126 channels jumping frequency self-moving, self-moving to option non-interfere frequency section, ensuring communication is reliable.
16 groups ID coding for setting, user can use 16 groups individual wireless net without any interfere each other in the same place.
4 grade power rate output for option.

Specifications:
Product model: DMX512 wireless receiver/transmitter
Effective Range: 400M ( visible distance )
Max. Emit Power: 20dBm
Receive Sensitivity: -94dBm
DMX connector: 3pin male-female sockets
Frequency frequency: 2.4G ISM 126 channels
ID coding: 16 groups
Display: 2 * 8 bit LCD
Input voltage: 9-12V DC 300mA MIN
Plug standard: EU plug, US plug ( optional )
Material: aluminum
Item size: 14.7 * 7 * 4cm/5.78 * 2.75 * 1.57in ( L * W * H )
Item weight: 262g/9.26oz
Package size: 15 * 15 * 5cm/5.9 * 5.9 * 1.96in ( L * W * H )
Package weight: 401g/14.17oz

Package included: ( Depends on your choose )

1R = 1pc receiver +1pc power adapter

1LCD= 1pc LCD controller + 1pc power adapter

1LCD and 3R= 1pc LCD controller + 3pcs receivers +4pcs power adapters

1LCD and 4R= 1pc LCD controller + 4pcs receivers+5pcs power adapters

1LCD and 5R= 1pc LCD controller + 5pcs receivers+6pcs power adapters

1LCD and 6R= 1pc LCD controller + 6pcs receivers+7pcs power adapters


SUNART 44*10W LED ACED RGBW 4 in 1 Wash Stage Effect Light For DJ Disco DMX Wireless Sweden Beam Flood Seetronic Ports Lamp

SUNART 44*10W LED ACED RGBW 4 in 1 Wash Stage Effect Light For DJ Disco DMX Wireless Sweden Beam Flood Seetronic Ports Lamp


Battery Powered 192 DMX 512 Stage DJ Light Controller Stage Lighting Party Pub Night Club KTV Moving Head Patent Mini Console

Battery Powered 192 DMX 512 Stage DJ Light Controller Stage Lighting Party Pub Night Club KTV Moving Head Patent Mini Console

Features:

1. 12fixtures each with 16 channels
2. 23banks each with 8 programmable scenes ( 184 scenes in total )
3. 8 channel slider with page up and page down.
4. 6 chase banks
5.Music, auto or manually triggered chase sequences.
6. Speed control from 0.1 second to 10 minutes.
7. MIDI connection facility ( MIDI IN ) to run the unit synchronous with your MIDI unit or compatible sofeware.
8. Blackout button.
9. DMX polarity switch at the rear.
10.19" rack mountable or can be used as a stand-alone unit.

Specification:

Power Supply: AC90-240V
Number of channels: 192ch
Number of channels per page: 16ch
Standard control : DMX512
Operation temperature: -10 to 50 degree
Dimensions : 29x15x3cm

Installation Operation:

1.Switch on via the power button on the side panel of the controller.
2.The controller will make a self-test
3.The power indictor lights up.
4.The DMX indicator will flash.
5.In the initial statur, the controller set on PAGE 1(CH1-CH16) and the page indicator lights up in Red.
6.If you want to control channels 17-32 press the page button until the page indicator lights up in Blue.
7.The master faders control the total dmx output of all channels.
Value 0 means all DMX outputs are closed.

Package Including:

1x 192ch DMX Controller
1x Power Adapter
1x Manual

192channels Standard Controller Pictures:

192channels Wireless Controller Pictures:

192channels Battery Controller Pictures:


ALIEN DMX512 Dfi Controller 2.4G Wireless Transmitter Receiver For Disco DJ Party Bar Stage Par Moving Head Beam Laser Lighting

ALIEN DMX512 Dfi Controller 2.4G Wireless Transmitter Receiver For Disco DJ Party Bar Stage Par Moving Head Beam Laser Lighting

-2.4G wireless DMX512 R/T
-126 channels jumping frequency automatically, high anti-jamming ability, to ensure works reliability
-7 groups ID code settable, User can use 7 groups individual wireless net without any interfere.
-Each other in the same place (Tricolor LED displaying Indicators)

Specification:

Input voltage: DC 5V 0.5A
Communication distance: 300M (visible distance)
Work frequency section: 2.4G ISM, 126 channels, frequency section
Max transmitting power rate: 20dBm
Receiver Sensitivity: -94dBm
CPU: 32-bit ARM Core
Modulation: GFSK
DMX Signal Interface:RS485
Operating temperature: -40 ~ 85 Celsius
Storage Temperature: -65 ~ 150 Celsius
Ambient Relative Humidity: 5 to 95% (non-condensing)
Automatic Reboot Trigger: Built-in WDT (watchdog timer)

Operating Manual:

ID code and LED color corresponding relationship:
1: RED
2: GREEN
3: RED+GREEN
4: BLUE
5: RED+BLUE
6: GREEN+BLUE
7: RED+GREEN+BLUE
1) Press momentary switch above the side led indicator to indicate ID setting.
2) Press again to set IC, to the color ID desired, adding 1 each time you press the switch will advance the color IDcode.
3) Working condition:
LED constant lit up No DMX or wireless signal.
Red LED flash: Transmitting.
Green LED flash: Receiving
4) RF frequency 2.400 - 2.525G, total 126 channels, it's searching automatically.
5) ID Code "1-7" groups ID code, press 'KEY' for setting, it only can work under same ID code of transmitter and receiver. (Same LED Color)

Establishing Communication:

1. Power on DMX512 wireless received board first and then following to power up the transmitted board.
2. Press the "Key" button to set the same ID value of the transmitted board and received board. Please use a different ID value if you need to use more than 1 group of wireless universals at the same time in the same place.
3. The red LED flashes when the transmitter transmits DMX data by no interfered frequency section, then the receiver changes communicated frequency section. Green LED flashes until received same ID value, the more DMX data, the faster the LED flashes.
4. Communication was established correctly.

Which Plug did I need?

In order to get the package soon, place choose the right Plug Type.

FAQ

Q: How can I use it?

PS: the video shows how to use ALIEN DMX Transmitter and Receiver (it is black shell and Plug-in type)

Q: Can I use this with microphones? Can I use it to make the microphones wireless?

A: No....this is for wireless DMX control of lights not audio.

Q: You have 5-Pin Wireless DMX Transmitter and Receiver?

A: Yes, If you need 5-Pin, you can buy this one:

Q: How many channels have?

A: there are 7 channels for the ALIEN and they are colored red green purple blue and so on. The transmitter needs to match the color using on all receivers.

Q: Have receiver buld-in battery?

A: no, this type need power supply, if you need a buld-in battery you can buy this one :

Q: Which plug I can choose?

A: The plug type as images below.

 

 

Wireless DMX 512 2.4G Transmitter/Female Receivers Short Version for Stage PAR Party Disco DJ Moving Head Laser Light

Wireless DMX 512 2.4G Transmitter/Female Receivers Short Version for Stage PAR Party  Disco DJ Moving Head Laser Light





This type need power supply, if you need a buld-in battery you can buy this one :


Specification:

1. 2.4G wireless DMX512 R/T

2. 126 channels jumping frequency automatically, high anti-jamming ability. to ensure works reliability

3. 7 groups ID code settable,User can use 7 groups individual wireless net without any interfere

4. each other in the same place...(Tricolor LED displaying Indicators)

5. Input voltage:5VDC 500mA MIN

6. Communication distance: 500M (visible distance)

7. Work frequency section: 2.4G ISM,126 channels.frequency section

8. Max transmitting power rate:20dB
Operating manual:
ID code and LED color corresponding relationship:
1: RED 2: GREEN 3: RED+GREEN 4: BLUE 5: RED+BLUE 6: GREEN+BLUE 7: RED+GREEN+BLUE

ID Setting
1. Press momentary switch above the side led indicator to indicate ID setting2. Press again to set IC, to the color ID desired, adding 1 each time you press the switch will advance the color ID code.

Working condition:
LED constant lit up: No DMX or wireless signal.Red LED flash: Transmitting.Green LED flash: Receiving

FAQ

Q : Can I use this with microphones ? Can I use to make the microphones wireless ?

A : No....this is for wireless DMX control of lights not audio .

Q : Does it have a 5 pin adapter for connecting to the DMX port on a lighting console?

A : It is a 3-Pin. If you need 5-Pin, you can contact SZWIYXE customer service .

Q : How many DMX addresses can be sent thru one transmitter and one receiver?

A : there are 7 channels for the SZWIYXE and they are colored red green purple blue and so on. The transmitter needs to match the color using on all receivers.







SUNART Comel Sip 480*0.5W RGB 3 in 1 LEDs Strobe Stage Effect Light Wireless DMX Wash Flood for DJ Moving Head Ip65 Waterproof

SUNART Comel Sip 480*0.5W RGB 3 in 1 LEDs Strobe Stage Effect Light Wireless DMX  Wash Flood for DJ Moving Head Ip65 Waterproof



Newest 2.4G Wireless 192 DMX Controller Battery Powered DJ Equipment DMX 512 Console For LED Par Moving Head Spotlights DJ Light

Newest 2.4G Wireless 192 DMX Controller Battery Powered DJ Equipment DMX 512 Console For LED Par Moving Head Spotlights DJ Light

Newest Wireless 192 DMX Controller Built in Battery DJ Equipment DMX 512 Console For LED Par Moving Head Spotlights DJ Lighting

Built-in Battery, Work about 72 hours.12 scanners control up to 16channels on each fixture. The scenes can be programmed into 6 chase sequences each holding up to 240 scenes which can be triggered by sound, manually by tap or automatically by the time faders between 0.1 seconds and 10 minutes. This controller is ideal for small theatres or stage applications.

Features:

1. 12fixtures each with 16 channels
2. 23banks each with 8 programmable scenes ( 184 scenes in total )
3. 8 channel slider with page up and page down.
4. 6 chase banks
5.Music, auto or manually triggered chase sequences.
6. Speed control from 0.1 second to 10 minutes.
7. MIDI connection facility ( MIDI IN ) to run the unit synchronous with your MIDI unit or compatible sofeware.
8. Blackout button.
9. DMX polarity switch at the rear.
10.19" rack mountable or can be used as a stand-alone unit.

Specification:

Built-in Battery, Work about 72 hours
Power Supply: AC90-240V
Number of channels: 192ch
Number of channels per page: 16ch
Standard control : DMX512
Operation temperature: -10 to 50 degree
Dimensions : 29x15x3cm
Weight : 1.5KG

Installation Operation:

1.Switch on via the power button on the side panel of the controller.
2.The controller will make a self-test
3.The power indictor lights up.
4.The DMX indicator will flash.
5.In the initial statur, the controller set on PAGE 1(CH1-CH16) and the page indicator lights up in Red.
6.If you want to control channels 17-32 press the page button until the page indicator lights up in Blue.
7.The master faders control the total dmx output of all channels.
Value 0 means all DMX outputs are closed.

Package Including:

1x 192ch Wireless DMX Controller
1x Power Adapter
1x Manual


Dmx 512 Controller Rechargeable Battery Wireless Receiver 2.4G Ism Dmx512 Wireless Transmitter Receiver For Stage Light Effect

Dmx 512 Controller Rechargeable Battery Wireless Receiver 2.4G Ism Dmx512 Wireless Transmitter Receiver For Stage Light Effect

Dmx 512 Controller Rechargeable Battery Wireless Receiver 2.4G Ism Dmx512 Wireless Transmitter Receiver For Stage Light Effect

This rechargeable receiver is used to stage light. It transmits standard DMX512 protocol data (generated by console). With it, you can control stage light in wireless way.

Features:

It can work about 9 hours after battery being fully charged.
Support color jumping in 126 channels.
High anti-jamming ability ensure stable performance.
User can use 7 groups individual wireless net without any interfering in the same place. (Tricolor LED displaying indicators)

Specifications:

Input voltage: 5V DC 500mA
Working frequency section: 2.4G ISM
Communication distance: 300M (visible distance)
Working frequency section: 2.4G ISM, 126 channels
Receiver sensitivity: -94dBm
ID code group quantity: 7
Battery: 16340 battery 3.7V 650mA
Power adapter: US standard, UK standard, EU standard, AU standard (optional)
Cable length: 177cm / 5.8ft
Item size: 2.6 * 11.3cm / 1 * 4.4 in (D * H)
Item weight: 81g / 2.8oz
Package size: 14.8 * 10.8 * 4cm / 5.8 * 4.3 * 1.6in (L * W * H)
Package weight: 192g / 6.8oz

Operating manual:

ID code and LED color corresponding relationship:
1: RED
2: GREEN
3: RED+GREEN
4: BLUE
5: RED+BLUE
6: GREEN+BLUE
7: RED+GREEN+BLUE
1) Press momentary switch above the side led indicator to indicate ID setting.
2) Press again to set IC, to the color ID desired, adding 1 each time you press the switch will advance the color ID code.
3) Working condition:
LED constant lit up: No DMX or wireless signal.
Red LED flash: Transmitting.
Green LED flash: Receiving
4) RF frequency 2.400 - 2.525G, total 126 channels, it’s searching automatically.
5) ID Code “1-7” groups ID code, press ‘KEY’ for setting, it only can work under same ID code of transmitter and receiver. (Same LED Color)

Establishing communication:

1. Power on DMX512 wireless received board first and then following to power up the transmitted board.
2. Press “Key” button to set same ID value of transmitted board and received board. Please use different ID value if you need use more than 1 group wireless universals at same time in same place.
3. The red LED flashes when transmitter transmits DMX data by no interfered frequency section, then receiver changes communicated frequency section. Green LED flashes until received same ID value, the more DMX data, the faster the LED flashes.
4. Communication was established correctly.

Packaged including: (Depends on your order)

1T = 1pc transmitter +1pc power adapter

1R= 1pc receiver + 1pc power adapter

1T and 1R= 1pc transmitter + 1pc receiver +2pcs power adapters

1T and 2R= 1pc transmitter + 2pcs receivers+3pcs power adapters

1T and 3R= 1pc transmitter + 3pcs receivers+4pcs power adapters

1T and 4R= 1pc transmitter + 4pcs receivers+5pcs power adapters

1T and 5R= 1pc transmitter + 5pcs receivers+6pcs power adapters

1T and 6R= 1pc transmitter + 6pcs receivers+7pcs power adapters

1T and 7R= 1pc transmitter + 7pcs receivers+8pcs power adapters

2T and 4R= 2pc transmitter + 4pcs receivers+6pcs power adapters

2T and 5R= 2pc transmitter + 5pcs receivers+7pcs power adapters

2T and 6R= 2pc transmitter + 6pcs receivers+8pcs power adapters

Note:

Indoor use only.
3 years warranty, repairment, free replacement except damaged artificially.
The manufacturer willn’t offer free service in warranty period if any repaired or uncapped had happened
It’s better to return to manufacturer if repairment is must, don’t do any repairment unless qualified electrician.
The working condition should be under temperature -20°C~+45°C, 10%~90%RH, no congelation, so as to ensure it’s lifetime.
It cann’t be covered by any superstratum, it should be swept periodly to prevent dust.

FAQ:

Q : Can I use this with microphones ? Can I use to make the microphones wireless ?

A : No....this is for wireless DMX control of lights not audio .

Q : Have receiver build-in battery?

A : YES

Q : Which plug i can choose ?

A : EU plug, US plug, AU plug, UK plug

Q: How many metters for the communication distance?

A: The standard reliable and safe communication distance between our transmitter and receiver is 700 meters.


Lighting wireless both uplight smart DJ S6 battery powered wireless dmx led lights 6*18w RGBWA+UV 6in1wedding uplighting

Lighting wireless both uplight smart DJ S6 battery powered wireless dmx led lights 6*18w RGBWA+UV 6in1wedding uplighting

Lighting wireless both uplight smart DJ S6 battery powered wireless dmx led lights 6*18w RGBWA+UV 6in1wedding uplighting


ITEM NAME
6x18w WDMX APP BATTERY RGBWA UV 6IN1 LED UPLIGHT
Input voltage:
AC 90-260V, 50/60Hz
Power Consumption:
150W
Light source:
6pcs high brightness 18watts RGBWA UV 6IN1 LED
Life Span:
100000hrs
Control Mode:
DMX512, master-slave, sound activated or auto operation, remote control, mobile phone app
DMX Channels:
6/10ch
Auto operation:
color change, color strobe, color dimmer, color gradual change/color jump change
Display:
4 digit digital LED display
Protect Rate:
ip20
Housing :
Flame-retardant thermoplastic
Color :
Black(White is available)
Dimmer:
0-100%
Strobe:
0-20HZ
Power
72w
LED angle:
15/35degree
Weight:
2.5kg
Battery working time:
All leds on 8-9hrs, Auto mode: 12-14hrs, One color on: 14-16hrs
Package
flight case or carton

  • white cutlery set
  • silver spiral bracelet
  • studio banner background
  • rose gold necklace extender
  • black lace tights
  • sequin crop top long sleeve
  • cotton cashmere fabric
  • pink shawl wedding
  • front lace vendors
  • white bow skirt
  • mesh shorts pockets
  • cartilage cuff pierced